Folsom Mold Removal

Folsom Mold Removal is regularly ranked as one of the best service alternatives for mold removal in the Folsom Region. Our team of regional mold removal specialists is prepared to serve you 24/7. Give us a call today for the most complete and thorough mold removal choice in Folsom, California!

Folsom Mold Removal and Restoration

Mold and mildew grow and grow in warm and moist locations that prevail throughout homes and businesses in the Greater Folsom area. If offered the opportunity to grow, mold could trigger severe damage to your home or business. Not only can it ruin your building, but mold can likewise present a severe health danger to anyone and everybody inside. While mold can be triggered my water damage, it can likewise be triggered by bad air circulation enabling wetness to become caught.

If you are trying to find mold removal for your home or business in Folsom, California, Folsom Mold Removal will deal with you to get rid of any and all mold problems while helping to restore anything that may have been harmed while doing so. Folsom Mold Removal will come out and perform a mold assessment provides total mold removal by cleaning up mold and helping to develop a healthier environment and improving the air quality in your home or business!

Call Today

Residential and Commercial
Mold Inspection and Removal

When left without treatment, mold will grow at an exponential rate. When you see (or suspect) mold, please do not attempt and clean it up yourself as it is not only hazardous, but many of the solutions that you find online have actually been proven inefficient, and can often even cause bigger problems. Schedule a call to get us out there today!

Folsom Mold Removal Service Area

In addition to Folsom California, Folsom Mold Removal also services over 50 additional cities, towns, and communities in the Folsom area. If you don’t see your city listed, please give us a call at (279) 279-5865 .  We proudly serve Roseville, Rocklin, Antelope, Rancho Cordova, Carmichael, Lincoln, Polk, El Dorado, Florin, Oak Park, as well as Folsom, California

Mold Removal Questions and Answers

What are the Most Common Places You'll Find Mold in your home or business?

Mold can be found anywhere. It will sometimes hide in probably the most unforeseen places. Having said that, mold can only grow in places where there’s wetness. Here is a list of locations to look if you suspect that you may have mold in your home.

  1. Chimneys – The areas between the bricks collect water and dirt. This makes it a great place for mold to hide out. To remove the mold, change any rusted caps and contact a chimney sweep. They’ll be able to obtain the mold from the chimney and they’ll furthermore get any harmful creosote. This will help your chimney to operate properly.
  2. Fridge Drip Pans – Underneath your refrigerator you’ll get a lot of wetness from spills and from condensation. This makes it a prime place for mold to collect and grow. To remove the mold, apply the pan with hydrogen peroxide. After that, wipe the pan clean with whitened vinegar. For best results, clean the floor underneath the fridge too.
  3. Front Loading Washers – The entrance-way of a front loading washing machine will get wet when in use. When it’s not really in use and the door is closed, mold can and can collect on the door. To remove the mold, wipe the door and gasket before closing. If you notice mold collecting, run some warm water with chlorine bleach. The combination should wipe out any mold that has collected.
  4. Window Seals – Condensation gathers there and with the combination of water and dirt, the windows are a great place for mold to multiply and grow. To remove, open up the window following a heavy rain. Wipe the moisture from your windows. If the seals between the windows are failing, replace them. Cleansing your window frequently will avoid the growth of mold.
  5. Dishes – Once you stack dishes that are still wet, it offers the perfect environment for mold to grow. To remove the mold, place the dishes within a dishwasher. You should wipe the cupboards with some vinegar to wipe out any mold which may be gathering there too. When done cleaning the dishes, dry them completely before putting away.
  6. Air Conditioners – When running, these trap dirt and dust and collect moisture from your air. This gives food and wetness for mold to grow. To remove the mold from your own AC, take away the front plate and use a HEPA vacuum cleaner to get rid of the mold. After that, clean the deplete pan with bleach and water.
  7. Bathroom Bathtub – After going for a shower or bath, wetness has collected on the sides from the tub. This makes it a perfect place for mold to get and grow. To remove, blend bleach and water within a spray bottle and spray it onto the affected area. Wipe off after a few minutes.

If you believe you have smelled mold in your home or if you suspect it may be in your home, these are good locations to look. Mold can conceal anywhere, which makes it hard to find. But remember that mold can only grow where there is moisture for it to grow. If mold is found, remove it as soon as possible.

How You Can Inspect for Mold

If you suspect that you have mold in your home, it’s important that you have a mold inspection. Mold could cause illness in people, so it is essential that you get the issue fixed. To thoroughly inspect your home for mold, you should know where to look. Just follow these pointers.

Where to Find Mold

  1. Check places which are full of wetness. For mold to grow it needs wetness, so this should be the very first places you look for mold. Make sure you look in locations such as under your sinks and in the basement.
  2. Check for locations that have recently been damaged with water. Have you lately got any floods? If so, check the location of the overflow. Check your water pipes too. Perhaps you have recently got a water pipe burst? If the water had not been cleaned up correctly, which is where you might have a mold issue.
  3. Verify your ceilings and wall cavities. The spacing between the walls are a great place for mold to hide, specifically being that they are covered off and trap moisture. Occasionally piping may drip, too, which will include more moisture between your walls. Mold expanding in these places will continue to spread so it is particularly essential that you find it before it begins to become visible.
  4. Check your bath curtains. Once you bath, dirt and hair shampoo mix, and leave a residue behind that is a perfect place for mold to grow. Unless you wipe down your bath curtain after every bath, you will see extra moisture that will allow for mold to grow.
  5. Check your household air ducts. If your house has central air conditioning or central heating system, your vents will encounter fluctuations in wetness. Because of the combination between hot and cold, moisture tends to collect on and in the drain pans. The vents will then become a primary location for mold to grow.


How to Look for Mold

  1. Make use of an in-home mold testing kit. The mold testing sets come with their very own testing instruments. All you must do is follow the directions given. However, be aware that these sets are hard to use and the outcomes can often be unreliable.
  2. Hire a specialist mold inspector. A specialist will have a number of various instruments and gear used for detecting mold. Before hiring a specialist, consult with your state’s contractor-licensing board to ensure that they are licensed to remove mold.
  3. Check the infected area usually after washing. If there was mold underneath your bathroom sink, be sure area regularly. If you discover that the mold has reappeared following the washing, the washing was not efficient, and you need to get that area cleansed again.

Inspecting your home for mold is particularly important. You should know where to look, and how to get rid of mold if you find it. Leaving behind the mold where you discover it could potentially put someone’s life at risk when the mold problem is not fixed immediately.

Is Mold Hazardous to My Health?

Did you know that some mold could be more poisonous to you and your body than pesticides? It’s been shown that a large number of homes have mold in them; up to 25%. Everyone is at an increased risk for mold poisoning. It doesn’t matter your age, gender, or the climate you live in – mold could be there.

Mold causes a couple of different health issues. It can actually be fatal, despite what some individuals say. Some individuals aren’t as sensitive to mold as others are, but mold will cause health issues. Some of these include:

  1. Rash – Some individuals are allergic to mold which can then cause a rash to appear on their body. In severe instances, mold could cause inflammation in your throat. It is not rare for mold to create rashes and hives show up.
  2. Coughing – Mold spores have become light and travel by air. It is very easy for mold spores to be inhaled. When they are inhaled, it creates irritation in the lining of your tonsils, causing you to cough.
  3. Sore Throat – If you’re allergic to mold, a sore throat can be your body’s way of defending itself from your allergen. Your immune system sees the mold as a danger as well as your throat can inflame in response. Inhaling the mold spores may also cause a sore throat. The mold spores could cause irritation in your throat, lungs, and airways.
  4. Asthma – Mold doesn’t always trigger asthma, but mold may bring on asthma attacks in people who have asthma. When exposed to mold, the person’s symptoms will get even worse. You may encounter more asthma attacks, a very restricted chest, and the attacks will seem much longer than usual.
  5. Fatigue – Contact with mold can make it tough to breathe for those who have pneumonia or some other respiratory problems. The issue in breathing can make you feel tired.

Some of these symptoms are very normal if you’ve been exposed to mold. Others tend to be more rare. Most people who have experienced an exposure to mold get a rash, coughing, or a sore throat. It is very common for people with asthma with an increase in asthma attacks. It’s much less common though for you to feel tired.

If you’ve been exposed to mold and so are experiencing any persistent symptoms, or even if any of your symptoms are not right here, you should go see a doctor. You will need immediate treatment and the fast eradication from the mold. It is vital that you listen to what your doctor tells you to do. People have died from too much exposure to mold.

Mold allergies vary in every person. Some individuals may not be affected at all. Others may encounter year-round symptoms due to mold, or they may only experience pain during certain times of the entire year. Usually those symptoms will occur within the wetter months.

To conclude, depending on the type of mold, it could be harmful to folks of all ages. If you suspect that any of your symptoms are due to mold you’ve are exposed to, alert your doctor.

How to Identify a Mold Problem

Play Video about rocklin mold removal youtube

Schedule Your Folsom Mold Removal Today and we will get someone out immediately, 24-hours a day, 7-days a week!

Call Now ButtonCall for a Free Estimate!